Inch deep groove ball bearing RLS 10-2RS, Bore 1.25", Outside diameter 2.75", Width 0.6875"
RLS and RMS inch series deep groove ball bearing dimensions conform to British Standard BS 292 : Part 2 : 1982. These bearings can carry axial loads acting on both directions, in addition to radial loads, even at higher rotational speeds.
The major applications of RLS and RMS inch ball bearings are in Jute Industries, Textile Industries, Line shaft applications, Tanneries, Rice Mills and all machinery equipment following Imperial standards.
These bearing will be limited for the order quantity. Customer need to contact us before ordering them.
| d | 31.75 mm | Bore diameter |
| D | 69.85 mm | Outside diameter |
| B | 17.462 mm | Width |
| Cr | 22.5 kN | Basic dynamic load rating |
| C0r | 13.2 kN | Basic static load rating |
| 7000 r/min | Limiting speed |
| ≈m | 0.306 kg | Weight |
| None | Locating feature outer ring | |
| Bearing steel | Material of race | |
| Sheet steel | Cage | |
| Contact seal | Closures | |
| CN | Radial clearance | |
| P0 | Tolerance |
| SKF | FAG | NBC | RHP |
| RLS 10-2RS1 | DN-2125 | LS-12-RR | LJ-1 1/4-2RS |
